B-Braun-Vista-Basic-757x1024

BBraun Vista Basic

The B. Braun Vista™ Basic Infusion Pump is an easy, convenient, cost-effective infusion therapy for ambulatory and home-care settings.

B. Braun understands that alternate site clinicians and patients need a pump that is cost-effective, simple to operate and has the ability to do more than just continuous infusions. The Vista basic was designed to ensure simplicity in all aspects of its use: from set installation, to programming, to special mode use and alarm correction.

Contact Us For Pricing

Category:

Product Description

Vista™ Basic

Specifications

Mechanism:

Linear Peristaltic

Flow Rate Range:

0.1 mL/hr to 800.0 mL/hr in 0.1 mL/hr increments

Volume to be infused:

0.1 to 9999.9 mL

Occlusion Pressure:

8 PSI (low setting), 17 PSI (high setting)

KVO Flow Rate:

1 mL/hr or selected rate (whichever is lower)

Volumetric Accuracy:

±5%

Weight:

11.9 lbs.

Internal Battery:

7.2 V, 1.2 Ah NiCd  (rechargeable)

Battery Capacity:

Approximately 3.5 hours at maximum delivery rate (based on a new, fully charged battery)

Power Requirements:

100-120 VAC, 50-60 Hz, 13 Watts

Leakage Current:

30 µA

Alarms:

Air-In-Line, Low Battery, Plug-In Now, Bag Empty, Door Open, Downstream Occlusion, Pump Stopped, KVO, Unit Malfunction

Memory:

User option to retain last Piggyback Mode or Continuous Mode data upon power up. Permanent data retention in Program and Ramp/Taper Modes when pump is turned off.

Tubing:

 BBraun Vista™  administration sets

Features/Modes

  • Continuous and Piggyback Modes
  • Program Mode for variable infusions
  • Ramp/Taper Mode for TPN infusions
  • Delay A Mode for postponing infusion start and finish